2.1.16 Start up
1. Use “Startup”
The “startup” program is used for setting the programs which need to be started
when the system starts up
2. Run “Startup” program
Open control center and select “Startup”
The operating interface is as the picture shows below:
Start Up
Check the programs which need to be started when the system starts up and click
“Apply” button, the new startup configuration can be validated. Click “Close”,
the program would exit and the settings would not be saved.
2.1.17 Remote Desktop
1. Use “Remote Desktop”
The remote desktop program is used for the settings of some parameters related
with the remote desktop when the terminal is used as the server side of the remote
desktop.
Include: Whether allow the remote monitoring, select remote check or control
and some security parameter settings of the terminal when the remote host connects
the terminal desktop.
2. Run “Remote Desktop” program
