The keyboard property program is used for setting the keyboard language and keyboard
model of the terminal as well as whether to enable NumLock key when the system boots up.
2.
Run “Keyboard” property
Open control center and select “Keyboard”
The operating interface is as the picture shows below:
3.
NumLock key
Keyboard Property
If “Enable as Startup” is checked, then after starting up, the NumLock key is enabled; or
NumLock key is not enabled.
2.1.7 User Password
1.
Use “User Password”
Through using the “user password” program, you can set the user password which is the
password for starting up/restart, screen saver and system lock.
2.
Run the “user password” program
