37 / 42
4.5.4.6.
CRUISE SETTING SUBMENU
CRUISE
DWELL TIME<SECS>
PRESET LIST
1 ON
1 2 3 4 5 6 7 8 9 0
0 1 1 0 0 1 0 1 1 1
BACK
EXIT
7
1
0 OFF
Screen 29: Cruise
The
CRUISE
function is used to make the camera run a cycle consisting of up to 30 preset positions.
This menu item is used to enable each of the preset positions used in the cruise cycle.
For the cruise cycle to be effective, the preset positions must be actually stored.
Option
Value
Explanation
DWELL TIME <SECS>
5 ~ 250
Duration (in seconds) of the dwel ing time on each presetting.
PRESET LIST
1 ~ 3
Value 1 selects the first group of Presets from 1 to 10, value 2
selects the second group from 11 to 20, value 3 the third
group from 21 to 30.
The following 10 digits (1/10) are used to switch the
corresponding preset in the corresponding ten (1-10, 11-20,
21-30) either on or off (1=
ON
; 0=
OFF
).
Table 26
4.5.4.7.
TRACKING SETTING SUBMENU
TRACKING SETTING
DEFAULT SETTING
SIZE SENS
GRAY SENS
LOST ACT
ZOOM SETTING
WAIT TIME<S>
<TRACKING BOUNDARY>
AUX
TRACKING SPEED
TRACKING TIME<M>
AUTO
BACK
EXIT
MEDIUM
MEDIUM
TO HOME&TRACKING
ON
40
OFF
AUTO
Screen 30: Tracking Setting Sub-Menu
Operating function
The auto tracking function is used to automatically track moving objects by detecting grayscale variations in the frame.
Option
Value
Explanation
DEFAULT SETTING
This function is used to load the auto tracking default
settings.
SIZE SENS
LARGE/MEDIUM/SMA
LL
This option defines the total dimensions of the object to be
tracked. The parameters are
LARGE/MEDIUM/SMALL
. A
object larger than one fourth of the screen is
LARGE
. An
object smaller than one eighth of the screen is
SMALL
.
GRAY SENS
HIGH/MEDIUM/LOW
This option determines the auto tracking sensitivity. The
sensitivity measures the grey scale variations of a certain
point in the frame in the unit of time.