33 / 42
Option
Value
Explanation
DWELL TIME 1
0 ~ 30
Time (in seconds) of activation of the AUX1 output
DWELL TIME 2
0 ~ 30
Time (in seconds) of activation of the AUX2 output
Option
Value
Explanation
ENABLE PASSWORD
ON/OFF
This enables the password.
EDIT PASSWORD
This is the password entry procedure.
4.5.4.2.
AUX SUBMENU
AUX
DWELL TIME<SECS> 1
0
DWELL TIME<SECS> 2
0
BACK
EXIT
Screen 21: AUX Sub-Menu
The camera has 2 alarm outputs (AUX1 and AUX2) which may be programmed to activate the external devices in the
case of alarm. The 2 outputs closed to ground.
Table 20
4.5.4.3.
PASSWORD SUBMENU
PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT
OFF
Screen 22: Password Sub-Menu
Table 21
The password is a numeric combination (max. 10 digits).
THE DEFAULT PASSWORD IS “0000”.
It is advisable to change the default password to prevent intrusions.
Do not lose or forget the programmed password.
Take note of the new password and keep it in a safe place.
INPUT OLD PASSWORD
PASSWORD
1 2 3 4 5 6 7 8 9 0
CLEAR
ENTER
BACK
Screen 23: Edit Password
1)
Select the password digits by moving the joystick in the horizontal direction. Symbol “▲” indicates the digit which will
be entered.
2)
Press
OPEN
to enter the selected digit.
3)
The entered numbers will be replaced by a “*” symbol on the screen for privacy.
4)
Enter all the digits correctly and select
ENTER
to confirm.
5)
During the password change procedure you will be asked to enter the old password. Enter the new password and
enter it again for confirmation.