2-2. Installation of Video Camera
Connecting Lens Controlling Cable
Camera Lens Controlling Cable should be provided by the camera supporter.
Connect the Camera Lens Controlling Cable well according to the corresponding
relationship between the camera and the outlet of decoding panel shown in the
following table.
Controlling signal of the camera lens
Corresponding outlet on decoding panel
Camera power supply
+12VDC
、
GND
Lens Zoom
ZOOM
Lens Focus
FOCUS
Lens Iris
IRIS
Lens Controlling public ground
COM
3. Connecting Video Cable
Connect BNC video outlet with the video output outlet of the camera, then use the
binding wire to tie the video cable inside the camera and the lens cable into the hole
beside the lens connecting outlet on the decoding penal. After installing the camera,
please setup communication protocol, baud rate, address, etc.
2-3. Installation of the Whole Housing and Bracket
图3 吸顶式外形尺寸图
P
ic
tu
re 3
O
ut
er
s
h
ape
and
s
ize of
ce
iling m
ount
s
tyl
e
Screw slot