Chapter 1: Product introduction
1. Goods listing
Open the package of fast Ethernet switch, and it contains the following:
A set of ONU, A power supply, a user’s manual and a stream line
Please contact with supplier if above product and accessory is missing or damaged.
2. Front panel instruction
Front panel of ONU have 17 kinds of status indicators, as the following picture
3. Back panel instruction
:
Back panel of ONU from left to right in turn is PON Port, two RJ45 Ports, a bunch port, a
replacement switch and a power supply jack, as following illustrate.
4. Indication light instruction
The signification of indicator from left to right is as following:
LED
Color
Status
Description
PWR
Green light the
indicator will light when ONU is opened.
-- Non-light
Checking the TX or power supply adaptor, make sure power supply
has connected well.
OPT
Green light
Checking the TX or power supply adaptor, make sure power supply
has connected well.
--
Non-light Optic link is ok.
HW
Green
light
Hardware is error
--
Non-light Normal work status
LLID1
-8
Green
light
Optic link is ok
--
Non-light Checking optic link is ok or not
100M
Green light
Corresponding indicator will light when 100Mbps equipment
connect with relevant port.
--
Non-light Non-light 100Mbps port does not joint equipment.
LINK
/ACT
Green
light
Light when equipment normally connect with 100Mbps ONU port
--
glitter
Glitter when the port receive or transfer data
LINK100
Green
light
Light when 100Mbps equipment link to relevant port
--
Non-light Non-light when 100Mbps port does not joint equipment.
LINK1000
Green
light
Light when 1000Mbps equipment link to relevant port
--
Non-light Non-light when 1000Mbps port does not joint equipment.
DUP/
COL
Green
light
Light when port is working base on full duplex mode
--
Non-light Non-Light when port is working base on half duplex mode
ACT
Green
Light
Light when equipment normally connect with 100Mbps ONU port
Green
glitter
Glitter when the port receive or transfer data
- 3 -