XtendLan GEPON ONU User Manual Download Page 4

 

5. Main feature: 

Support single fiber WDM technology (downstream 1490mm, upstream 1310mm), only need to 

link    with OLT together by one fiber, the transfer length’s at least 20Km. 

Bandwidth distribution has flexible, downstream share bandwidth by adapting encrypt broadcast 

transfer way for different user. .Upstream share bandwidth by TDMA . Adjust automatically speed 

rate according to the line status. Support minimum speed rate adjustment base on 1kbps, and 

establish firm basic to fractionize business for telecommunication dealer. 

Support generally team broadcast function. User can choose to achieve mutual video multimedia 

business by themselves name (such as VOD, Video conference) 

Bind user, MAC address and IP address together in order to prevent account was embezzled 

hostility, ramble, virus spread abroad and attack of hostility data stream., so that can provide 

perfect safety guarantee measure for user. 

Support multi LLID and single LLID configuration mean. Different user and business can adapt 

different LLID access. Guarantee user’s different OOS grade. 

Installation and maintenance are very easy. Support differed local/long-distance and many means 

to manage configuration and upgrade of software. Work in partial port OLT. It can make 

long-distance malfunction diagnosis and orientation function come true, and greatly reduces 

maintenance workload. 

Network connects: Provide high speed date business for user. 

FTTH connects: Provide high speed date business and CATV business for family user which 

already has speech copper line resource. 

FTTB connects: adapt the mean of fiber to corridor or big corridor to provide high speed data 

business. 

Physics feature 

Physics dimension (length162 x width117 x high30, unit: mm) 

Power supply

DC 5V 

Function loss

5W 

Temperature:

 

Operating temperature

0

50

 

Storage temperature

-30

60

 

Relative humidity

10

90% (non-condensation) 

Weight:

<500g 

 

Technology guide line

Standard :

IEEE 802.3ah、IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3z 、IEEE802.1d、

IEEE 802.1p、IEEE 802.1q、IEEE 802.1x、RFC1155、RFC1157、RFC1112、RFC1113 and so 

on

●A fixed 10/100M BASE-TX Port 
●A fixed 10/100/1000M BASE-TX Port 
●128 digit AES Encrypt 
●Support 8 logic link. 
●Each Ethernet port support 64 Mac Addresses based on 802.1D Bridging

 

●Support 802.1Q VLAN 
●Support 802.1P 
●Support 40 stream (20 upstream/20 downstream) 
●Inbuilt 1.25 MB buffering 
●Support 802.3ah OAM  
●Support 802.3ah transfer error and revise 
●Inbuilt MIB 

- 4 - 

Summary of Contents for GEPON ONU









Reviews: