Network Video Recorder User Manual
18
3
）
Configure key point parameters, such as the key point No., duration of staying for one key
point and speed of cruise. The key point is corresponding to the preset. The Key Point No.
determines the order at which the PTZ will follow while cycling through the cruise. The
Cruise
time
refers to the time span to stay at the corresponding key point. The
Cruise Speed
defines the
speed at which the PTZ will move from one key point to the next.
4
）
Click the
Add
button to add the next key point to the patrol.
5
）
After finish setting, click
Exit
button.
5.2.3
Pattern Setting
Purpose:
Patterns can be set by recording the movement of the PTZ. You can call the pattern to make
the PTZ movement according to the predefined path.
Steps:
1)
Choose pattern number in the drop-down list.
2)
Click
button to begin and click corresponding buttons in the control panel to move the
PTZ camera, then click
button to end. The movement of the PTZ is recorded as the pattern.
5.2.4
Linear Scan Setting
Steps
：
1
）
Select a number, use the directional button to wheel the camera to the location where you
want to set starting point, click
button.
2
）
Wheel the camera to the location where you want to set end point, click
button.
3
）
Click
, the PTZ camera will move from the starting point to the end point.
