EX-SDI DVR OPERATION MANUAL
- 25 -
`
3.7
PTZ Control
Before you use the pan/tilt the console, users must first set up PTZ Protocol (see "PTZ configuration"-) "PTZ
configuration"), you cannot pan/tilt control operations. Head's direction, step size, zoom, focus, Iris, preset point,
cruise, between point, line scan, levels of lighting, wiper blades, rotated, and so do the border control. Step is mainly
used for operations, such as stride length is 8 turns faster than the rotational speed of step is 1. Pan/Tilt rotation
support 8 direction, respectively, up, down, left, right, left, top, right, bottom, bottom left, bottom right.
Figure 2-5
[Linear scan]:
through the direction buttons to select the camera line's left border, left edge of and click the setting
button to determine the position of the left border. Through the direction buttons to select the camera to the right edge
of linear scan and click on the settings button on the right position to determine the right edge. Finish line sweep
course settings.
[Preset]:
through direction buttons to turn the camera to the desired position, preset input box enter the preset point
values, click the Add button to save.
[Cruise group]:
first fill a cruise line number in the input box, then enter the preset point values in the preset input
box, click the Add button, which is the point in which cruise Group adds a preset point. Multiple operating multiple
preset points. Or click the delete button, you can delete the presets the cruise route between points. Also multiple
operations to remove more than one that already exists in the cruise set preset point between points.
[Patrol Track]:
will trace the process record as Rangers
x
, click the start recording button and then zooming back to
PTZ control menu, aggregation, Aperture or direction, then returned to the tour after a series of operations such as
tracking settings menu, click on the stop button. Complete a trace route-tracking settings. Secondary: select one of
the Assistant, click Start or stop button.
[The lights wipers]:
PTZ protocols have lights wipers under lights wipers may be subject to opening and closing
control.
