EX-SDI DVR OPERATION MANUAL
- 9 -
`
[System Time]:
Change the DVR system time Note: after you change the system time need to click Save after key
save individual system time.
[Date Format]:
Select the date display format.
[Daylight saving time]:
Daylight saving time check box is checked, and then click on the settings button, set the start
and end of daylight time.
[Date]:
as the date format separator.
[Time Format]:
includes 24-hour and 12-hour.
[Language choice]:
Switches the system menu language (different models have different language options).
[HDD Full]:
you can choose to either stop or cover. Stop recording conditions are: current working disk is
overwritten, or write my current working disk full, and the next non-empty hard disk, it will stop recording;
overriding condition is: write my current working disk full, and the next hard disk is not empty, it loops over the first
video file.
[Video Length]
: You can set the length of each video files, the default is 60 minutes, a maximum of 120 minutes.
[DVR NO.]:
It is used more than a remote control or control panel remote control DVR, only when I press the add
key on the remote control and enter the remote address and have the same address with a corresponding native DVR
number for remote control operation.
[Video Standard]:
select the video standard, PAL/NTSC (must match the camera system).
[Auto Logout]:
menu ahead of time 0-60, 0 can be set to not set the standby time, if you set the time, after the idle
during this time, the system automatically logs off the current logged on user, users to action menu you need to log in
again.
6
Video Configuration
Video setting contains the basic configuration of the video and the video plan. Including videos of the channel is
mainly video resolution, frame rate, bit rate, and set the parameters such as channel title; video program you are
automatically recording mode under the channel in different time periods, recording different States (normal, motion
detection and alarm) video
.
Figure 1-5
