7
3.
Dismantle the HDD bracket. 4. Install the first HDD. Note the HDD is placed
upside down. Please make sure bracket is in
correct position.
5.
Install the second HDD on the bracket. 6. Fix the HDD bracket into the internal unit.
7. Connect HDD cable to SATA port 8. Connect power cord to the HDD.
9. Place the unit cover back and screws firmly.
After HDD installation, please check connection of data ribbon and power cord.
1.3
Front Panel
This section provides information about front panel and rear panel. When you install
this series DVR for the first time, please refer to this part first.
These series DVR has two types of front panels.
One series front panel is shown as in Figure 1-1.
