18
function, please set at least one HDD as redundant.(Main menu->Advanced-
>HDD Management)
Snapshoot: You can enable this function to snapshoot image when alarm occurs.
Record types: There are three types: regular, motion detection (MD) and Alarm.
Please highlight icon
to select the corresponding function. After all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there is a color bar for your reference. Green stands
for regular recording, yellow stands for motion detection and red stands for alarm
recording.
2.3.3 Manual record
Note:
You need to have proper rights to implement the following operations. Please
make sure the HDDs have been properly installed.
2.3.3.1 Manual record menu
There are two ways for you to go to manual record menu.
Right click mouse or in the main menu, Advanced->Manual Record.
In live viewing mode, click record button in the front panel or record button in the
remote control.
There are three statuses: schedule/manual/stop. Highlight icon
“○”
to select
corresponding channel. See Figure 2-6.
Manual: the highest priority. After manual setup, all selected channels will begin
ordinary recording.
Schedule: channel records as you have set in recording setup (Main Menu-
>Setting->Schedule)
Stop: all channels stop recording.
Figure 2-6
2.3.4 Encode
Encode setting includes the following items. See Figure 2-7.
Please note some series do not support extra stream.
Channel: Select the channel you want.
Compression: system supports H.264. Or you can select from the dropdown list.
Resolution: System supports various resolutions, you can select from the
dropdown list. For this model, we can support D1/HD1/CIF.
