7
Figure 2-9
2.3
System Setup
On the standby interface, click the
button; you can go to the main interface. Click the
“Config” button. You can set the password, background, display, and ring, touch panel calibration,
restore factory default setup, project installation and etc. You can set the corresponding
parameters if necessary. See Figure 2-10.
Figure 2-10
2.3.1 Password Setting
The password setup interface is shown as in Figure 2-11.
Here you can set general user password, door station unlock password, door station anti-hijack
password. Please input the old password, and then input new password and confirm. Click the
modify button, the password is successfully modified.
Default password is “888888”.
Please note the door station unlock password and door station anti-hijack password shall
be verified by the management centre before they become valid.