XtendLan DPM-IP700 Quick Start Manual Download Page 22

Page: 22 / 22

FAQ

Q: My indoor monitor screen is black and the indication light is off. What shall I do?

A: Please check the power socket connection is OK or not.

Q: My indoor monitor can not generate a call and implement the monitor function. The network

indication light is off. What shall I do?

A: Please check the network cable connection is OK or not.

Q: When the door station is calling the indoor station, but I can not hear the ring from the indoor

station. What shall I do?

A: Please check your do-not-disturb (DND) mode has been enabled or not. Please check the

DND indication light is on or not.

Q: My indoor monitor ring volume is too low. What shall I do?

A: Please check the ring volume setup is OK or not.

：

I have some problems, I am not so sure or I can not fix.

：

Please contact your local retailer for help.

Note:



This document is for reference only. Slight difference may be found in the user

interface.



All the designs and software here are subject to change without prior written notice.



If there is any uncertainty or controversy, please refer to the final explanation of us.



Please visit our website or contact your local service engineer for more information.

Summary of Contents for DPM-IP700























Search results

Summary of Contents for DPM-IP700

Reviews:

Brands by name

Popular brands

XtendLan DPM-IP700, Quick Start Manual

Search results

Summary of Contents for DPM-IP700

Reviews:

Brands by name

Popular brands