22
3.7 Two-Speed Climbing Mode
Light
High/low
speed switch
Press the high/low speed
switch approx
0.2 seconds to switch modes.
The lights will switch colors,
gear “
－
” is low speed mode
(flash green), gear “
＝
” is
high speed mode (flash red).
The initial state of each
power-up is low speed mode
(flash green).
This machine has angle
controlling function. When
the stair climbing machine is
started at wrong operatin
angle( too large or too small
an angle), the climbing arm
will rotate very slow.This is
an angle error prompt, not a
fault. Press the high/low
speed
switch
about
3
seconds to turn off the LED
light and
after the light
switch
colors,
angle
controlling function turn off.
After
repower
the
machine,the
angle
controlling
function
will
automatically return to the
initial on state.
