15
UM Termometri Temp70 PT100 Vio ENG rev.0 05.04.2021
P9.3 Backlight mode
Access this setup menu to select the contrast mode to use for the display backlight:
•
INDOOR (In)
– Recommended if you use the device indoors;
•
OUTDOOR (Out)
– Recommended if you use the device outdoors;
•
AUTO
– Default option. Thanks to the brightness sensor, the display automatically adapts to the
environment conditions. This mode also ensures longer battery life.
P9.4 Brightness
Access this setup menu to choose between three different levels of display brightness:
•
LOW
– low;
•
MEDIUM
– medium;
•
HIGH
– high.
Note
: Keeping the display bright always adversely affects battery life.
P9.5 Sleep mode
Access this setup menu to select whether and after how long activating the device Sleep mode:
•
OFF
: Sleep mode off.
•
2 MIN
: The instrument enters Sleep mode if no key is pressed for 2 minutes;
•
5 MIN
: The instrument enters Sleep mode if no key is pressed for 5 minutes.
When the device is in Sleep mode, the brightness of the display is reduced to a minimum, significantly saving
battery consumption.
Note
: To exit from the Sleep mode and return the display to normal brightness, press ANY button.
Once the display brightness is activated, the buttons reacquire their function (paragraph "Key
function").
P9.7 View difference
Access this Setup to set how to view the temperature difference between the two channels as absolute
value. This difference will be shown in the middle of the display in the screen with double channel.
Note
: the difference is shown also for recall of data saved, HOLD function, MAX/MIN recording
and recall of MAX/MIN value.
P9.8 Reset settings
Access this Setup to restore the parameters of Settings menu.
The reset takes all the parameters to the default settings shown in the table above.
Note
: after the Reset, the instrument returns in measure mode and all the parameters return to
the default settings.
P9.9 Auto off
Access this setup menu to activate or deactivate the auto-shutdown of the instrument:
•
YES:
The instrument automatically turns off after 20 minutes of inactivity;
•
NO:
The instrument remains always on, even if you are not using it.
IMPORTANT:
The correct and systematic use of parameters P9.3 / P9.4 / P9.5 / P9.9 allows to significantly
lengthen battery life.
