14
UM Termometri Temp70 PT100 Vio ENG rev.0 05.04.2021
Example of automatic Data Logger mode
Example: automatic recording of channel 1 on internal memory every 2 minutes.
•
Connect the temperature probe only on channel 1;
•
Access to the LOG SETTING P8.0 setup menu;
•
Enter the LOG TYPE P8.1 menu, press the button
and move with directional keys to MINUTES;
•
Use the directional keys to change the number that flashes on the display. Enter "2" and confirm with
key
.
•
Return to measure mode.
The icon
is on, which indicates that an automatic frequency Data Logger has been set.
Press
to start recording; the icon
starts flashing, indicating that the storage is in progress. The
number next to the
M+
icon indicates how much data has been saved.
•
Press again
to end the recording and the icon
returns fixed on the display.
Note
: if the automatic switch off is activated, the instrument will turn off after 20 minutes.
For a longer recording is necessary to deactivate the auto-switch off P9.9.
Instrument configuration menu
•
In measure mode, press button
to access the SETUP menu;
•
Press the key
or
to move to SETTINGS menu P9.0;
•
Press the key
to access the menu;
•
Move with keys
and
to select the program to access.
The table below shows the setup menu structure for the instrument, for each program, there are the options
that the user can choose and the default value:
Configuration Settings menu
Program
Description
Options
Factory Default Settings
P9.1
TEMPERATURE UNIT
°C - °F
°C
P9.2
DATE AND TIME
---
---
P9.3
BACKLIGHT MODE
INDOOR / OUTDOOR / AUTO
AUTO
P9.4
BRIGHTNESS
LOW / MED / HIGH
MED
P9.5
SLEEP MODE
2 MIN / 5 MIN / OFF
2 MIN
P9.7
VIEW DIFFERENCE
YES / NO
NO
P9.8
RESET SETTINGS
YES / NO
NO
P9.9
AUTO OFF
YES / NO
YES
P9.1 Temperature unit
Access this setup menu to select the temperature unit to use: (°C - °F).
Note
: by setting a different unit of measurement, the offset will be convert to the new measure unit. The
offset correction is shown when the instrument is turned on and in menu P7.3.
P9.2 Date and time setting
Access this setup menu to update the date and time of the device. Use the directional keys to change the
year, confirm with button
and repeat the same operation for month, day, hours and minutes.
