9
UM Termometri Temp70 PT100 Vio ENG rev.0 05.04.2021
•
Instrument transportation
The instrument is always supplied with the appropriate carrying case. Use the original case only, to transport
the instrument. If you need to buy it again, contact your local distributor. The interior of the case is shaped
to be able to house the instrument and the sensors still connected.
•
Key Functions
Button
Pression
Function
Short
Press to turn the device on or off
Short
In measure mode, press to enter into the Setup menu.
In the setup menus, press to select the desired program and / or value
Short
Turn on the MAX/MIN recording function, view of the MAX and MIN
recorded values
Long
Turn on/tun off of HOLD function.
Turn off of the MAX/MIN recordings (if active)
Short
To scroll the different views while the two probes are connected: channel 1,
channel 2 and both channels simultaneously.
Into the setup menus, press to return to measure mode
Short
To scroll and modify the values of the parameters in the Setup menu.
Turn on/turn off data recording
Short
To scroll and modify the values of the parameters in the Setup menu.
Recall the saved data
IMPORTANT:
•
When the Sleep mode is active (by default after two minutes of inactivity of the instrument) press any
key to reactivate the brightness of the display
.
•
Only at this point do the keys regain their function
.
•
Inputs / Outputs connections
Use original accessories guaranteed by the manufacturer only.
If necessary, contact your local distributor.
Temp70 PT100 Vio upper board
Read the manual before proceeding to connect the probes
CHANNEL 1
SINGLE 3 PIN CONNECTOR
for temperature probe
PT100
CHANNEL 2
SINGLE 3 PIN CONNECTOR
for temperature probe
PT100
Micro USB
for connection
to PC and power supply
