IPC-300 User Manual
The IPC series has one sensor port and alarm port. Actual numbers of
sensor, alarm ports and beep may vary depending on models.
When a decoder system instead of a PC client is connected to a IPC, one system
becomes a Local system and the other a Remote system (Generally a system which is
being used by the user is called as Local system). Then, actions for events can be
configured for events from remote system as well as for local system. For example, it is
possible to turn on an alarm device in local(center) decoder system when a sensor
device in remote(site) IP camera is triggered.
Local
section configures the actions for
events from local(self) system, and configuration activates local devices and
Remote
sections configures the actions for events from remote(peer) system.
. The following table lists the possible actions for events.
Action
Description
Sensor In
One sensor in port
Alarm out
Triggers alarm (relay) port.
Sends E-mail to the specified address. AVI file can be
attached
FTP
Upload AVI file to a specified FTP server
Sensor
Configure the actions when the sensor is activated. Multiple actions can be set
for a single event.
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be
set for a single event.
On Motion
Configure the actions when motion is detected. Multiple actions can be set for a
single event.
-24-
