IPC-300 User Manual
3. System Operation
1. Remote Video Monitoring
There are two ways to view the video once connections are made between the site and
center system. In order for a proper operation, an IP address must be set accordingly
and please refer to
True Manager in Chapter 4
or
Remote Setting in Chapter 5
for a
further details.
Default ID : admin Password : 1234
Video Monitoring with Decoder System
Once the IPC IP address is set in the remote IP address section of the decoder, the
decoder system will connect to the IPC and start receiving the video images. Normally,
a monitor connected to the decoder will display video images.
Video Monitoring using Internet Explorer
If an encoder’s IP address in entered on the Internet Explorer, the system will ask for
confirmation to install Active-X control. Once authorized, the Internet Explorer will start
to display video images from the encoder as shown below.
http://192.168.10.100
-10-
