265 Prado Road, Suite 1 | San Luis Obispo, CA 93401 | 805.541.0100 | xpressfill.com | [email protected]
8
| XpressFill Systems LLC
3
Setting Up Your Filler
and Filling Your First Bottle
Required Equipment
•
XF4500 bottle filler
•
Pressurized CO2 tank and 1/4" hosing (an additional CO2 tank can be used or a ‘Y’ fitting from your CO2 tank)
•
Air compressor and 1/4" hosing
•
Outlet container and 1/4" hosing
(See Figure 2 on page 9)
Connect the air/CO2 and inlet from the keg hosing
to their respective attachment points shown in
Figure 1.
Note:
Some air/CO2 and liquid will come out of
the vent in operation. The output labeled “Vent”
should be connected to a container to collect any
liquid.
Figure 1
