background image

 

WARRANTY 

 

XPOWER 1 Year Limited Warranty covers the unit from defects in materials and craftsmanship. The Warranty 
covers normal use for a term of one year from the original date of purchase including parts, labor and one way 
shipping.  
 
Warranty does not cover signs of misuse including, but not limited to, a unit that has been dropped, subjected 
to water damage, tampered with, improper voltage use and unauthorized maintenance and repairs.  
The POWER CORD and FILTERS are not covered by the warranty. 
 
Service 
 
In order to receive service or replacement parts under warranty, you must: 

 

Call XPOWER Customer Service at 855-855-8868 or 626-285-3301 for a Return Merchandise 
Authorization (RMA) number and return instructions. 

 

Have original proof of purchase. 

 

Use original packaging or Industrial certified packaging method. 

 
The end user will be responsible to ship the unit (with the RMA number showing on the shipping label) to the 
XPOWER Service Department. Upon inspection, we will advise you of the repairs needed and the cost (if 
applicable). XPOWER will provide repair or replacement parts depending on warranty. 
 
This warranty applies only while this appliance is used in the United States.  
 
 
 

WARRANTY REGISTRATION

 

Please  complete and mail or fax for your product warranty.  F or a multiple units, please list serial numbers on a separate sheet of 

paper.  Address:  XPOWER MANUFACTURE,  INC. 220 Clary Avenue San Gabriel, CA 91776, USA

 

Tel: (626) 285-3301;   Fax: (626) 285-3302

 

Company Name / Contact Person / Title

 

 

 

Address

 

City

 

State / Province

 

Zip

 

Country

 

Phone

 

Fax

 

E-mail

 

Model #

 

Serial #:

 

Date of Purchase

 

/

 

/

 

Purchased  From

 

Additional Comments / Suggestions

 

Summary of Contents for XD-125












Reviews: