ASSEMBLY & PARTS
1.
Your XD-125 Dehumidifier is fully assembled with the exception of the handle
2.
Using a Phillips screwdriver, loosely attach each screw to unit. DO NOT TIGHTEN until all six screws
have been fastened. (*You will experience some resistance as screws fit into housing).
3.
Alternate diagonally between screws when tightening to ensure the best fit.
1.
Metal Handle
5. Air Outlet Grill
2.
Control Panel
6. Air Inlet Grill
3.
Semi-Pneumatic Wheels
7. Power Cord
4.
Water Hose Bracket
8. Water Hose
DO NOT
dispose of any packaging until you have confirmed the appliance is operational.
After removing the
packaging, ensure the contents are intact and complete. In the unlikely event of missing parts, contact your
retailer.
DRAINAGE OPTION:
When drying extremely humid spaces,
a plastic pipe with a diameter
larger than 6.7” can be attached
to the hood as shown for faster
purging.
