https://www.XPOtool.com
Item 62547
Page 7
The Tool Experts
05 2022-1
specially developed for biological filtering, offers these bacteria ideal reproduction conditions. Inside the
BIOCELL filter, toxic organic substances are transformed into natural plant food – a natural process
particularly contributing to the biological balance of your garden pond.
Assembly (Fig.
1)
•
Attach the spout connector
(5)
to the fountain pump
(1)
using the sleeve
(4).
•
Then attach the fountain tube
(6)
by screwing it onto the spout connection
(5).
The flange-and-
seal side must point upwards.
•
Finally, you can choose whether to attach the stepped fountain
(7),
the bell-shaped fountain
(8)
or the bubbles-forming fountain
(9)
to the fountain tube
(6).
Power connection
The device that you have purchased is already provided with a safety plug. The device is intended for
connection to a safety socket with 230
V ~ 50
Hz. Make sure that the socket outlet is adequately fused
(min. 6
A) and is in perfect working order. Insert the power plug into the socket – the device is then
immediately ready for use.
Commissioning
•
When commissioning the pump, obey the above security instructions.
•
Place the pump on a horizontal surface that is slightly above the pool/pond floor, which prevents
the device from being excessively contaminated from the bottom sludge
•
Make sure that the inlets on the suction basket are not blocked.
•
Make sure that the pump is entirely covered with water. Do not operate the pump if it is outside
the water or if it protrudes above the water surface.
Operation
The pump has 3 operation modes:
•
only as fountain (stepped fountain, bell-shaped fountain, or bubbles-forming fountain)
•
together with the spout connection to operate a water game
•
only with the spout connection to operate a water game
Operation with fountain only (see Fig.
2)
When placing the pump in the pond/pool, make sure that the fountain head protrudes above the water
surface. If only using the fountain, you must close the stopcock
(A)
of the spout connection by turning it
a quarter turn clockwise. The stopcock
(B)
must be open (see Fig.
2).
Operation of fountain and spout connection (see Fig.
2)
Mounting the pump is done as described above. You can connect additional water game with an inner
tube diameter of 13
mm or 20
mm to the spout connection. The spout connection is opened by turning
the stopcock
(A)
counter-clockwise.
Operation with spout connection only (see Fig.
3)
Therefore, the stopcock
(B)
must be turned 90°. The stopcock
(A)
must be open. Thus, all the water
flows through the spout connection, no water flows through the fountain.
