XPENG P7 2023 User Manual Download

Page: 71 / 316

Preparations Before Driving

Interior Rear-View Mirror

Automatic Anti-Glare

It can automatically reduce the light coming

It can automatically reduce the light coming
from the rear based on the light sensor, thereby

from the rear based on the light sensor, thereby
optimizing rear visibility for driver.

optimizing rear visibility for driver.

►

Be careful not to cover the light sensor
on the inside rear-view mirror, and clean
its surface in a timely manner.

Wireless Charging for Phones

The wireless charging function of the phone is

The wireless charging function of the phone is
enabled by default, tap on the CID "

enabled by default, tap on the CID "

→

Vehicle

Settings

" to disable/enable this function.

Summary of Contents for P7 2023





























































































































































































































































































































Search results

Summary of Contents for P7 2023

Reviews:

Related manuals for P7 2023

Brands by name

Popular brands

XPENG P7 2023, User Manual

Search results

Summary of Contents for P7 2023

Reviews:

Related manuals for P7 2023

Brands by name

Popular brands