Safe Driving
158
Secondary Collision Mitigation (SCM)
Secondary Collision Mitigation (SCM)
Secondary Collision Mitigation (SCM)
Secondary Collision Mitigation (SCM)
Description
Description
Secondary Collision Mitigation (SCM): After the
Secondary Collision Mitigation (SCM): After the
first collision, this function will automatically apply
first collision, this function will automatically apply
brake to slow down or stop the vehicle, thus
brake to slow down or stop the vehicle, thus
minimizing the risk of a secondary collision and
minimizing the risk of a secondary collision and
mitigating the damages.
mitigating the damages.
Hill-Start Hold Control (HHC)
Hill-Start Hold Control (HHC)
Hill-Start Hold Control Function
Hill-Start Hold Control Function
Description
Description
If the vehicle starts at a standstill on a ramp
If the vehicle starts at a standstill on a ramp
greater than 4%, when the driver releases the
greater than 4%, when the driver releases the
brake pedal, depress the accelerator pedal, and
brake pedal, depress the accelerator pedal, and
the power output is not sufficient for the vehicle
the power output is not sufficient for the vehicle
to move off (the vehicle tends to slide), HHC will
to move off (the vehicle tends to slide), HHC will
maintain the braking force and keep the vehicle
maintain the braking force and keep the vehicle
at a standstill to prevent it from sliding.
at a standstill to prevent it from sliding.
Note
●
The HHC function is only available when
the vehicle is in the D or R gear, on the
ramp, and the brake pedal is going to
be released, it'll automatically generate
braking force to keep the car stationary.
●
The HHC function lasts for about 1 s. The
held braking may be released in advance
depending on factors such as the driver
operation and the ramp.
Caution
HHC can provide brake assistance, but it cannot
go beyond the laws of kinematics. For safety
reasons, the driver shall timely press the brake
pedal based on the actual situation to avoid
accidents caused by the sliding downhill too
fast.
Summary of Contents for P7 2023
Page 1: ...User Manual XPENGP7...
Page 3: ...Preface 2...
Page 149: ...Safe Driving 148...
Page 316: ...NO 202306U01...