Xpeed 320R, User Manual

Page: 51 / 111

51
Chapter 7
CLI Commands
The X320R provides a Command Line Interface (CLI) for end-users who are
more comfortable with configuring the X320R using a command line. This sec-
tion describes the purpose and usage of commands available through the CLI.
When using CLI commands, you do not have to type in the full command syntax.
You can enter in enough of the command for the X320R to recognize the com-
mand. For example, "
show dhcpsubnet all " can be as " sh dh a ".
However, "
sh d a
" will be ambiguous since "
d
" can be either "
dhcpsub-
net " or " dslconfig " or " debuglevel ".
1. A
DD
Add command adds entries to tables.
It accepts the following input parameters:
1)
ARPEntry
: Add entries to the ARP table. The ’Apply ARPEntry’ command
activates the entries.