Xpeed 320R, User Manual

Page: 87 / 111

Frequently Asked Questions
X320R User’s Guide 87
• Q: What do I do if I lost my password?
You have to reload your configuration file and firmware.
• Q: My modem is currently configured to operate at _____ speed. Is there a set-
ting that I can change to make it faster?
No. The speed is predetermined. Changing the speed setting on your modem will
not make it operate at a faster speed. Instead, your connection will be disabled
since the DSLAM will expect a specific configuration from your modem.
• Q: I lost my SDSL cable. Where can I order a new one?
The SDSL line uses the center pair of conductors. If you loose the SDSL cable,
you can use a standard telephone cable instead. However, the connector on the
telephone cable may be smaller, so be sure that the connectors are seated properly.
• Q: What kind of Ethernet cable can I use?
You may use any Category 5 Ethernet cable. These are commonly available
through most computer retailers.
• Q: How can I setup two X320’s to operate in a back-to-back mode?
Typically, your X320R will connect to a DSLAM at the central office. However, it
is possible to connect two X320R units using a twisted pair line (up to 18 Kft).
One unit may be left in Network Termination mode. The other unit must be con-
figured to Line Termination mode.