Xoro HSD 8450, Operation Manual

Page: 98 / 262

46
HSD 8450
Engl
ish
TROUBLESHOOTING
Symptom Correction
No remote control
•
Check the batteries in the remote control
•
Are the polarities correct?
•
Batteries are depleted. Please uses new one.
•
Point the remote control unit at the Infrared sensor and
operate.
•
Remove the obstacles between the remote control and
the Infred snesor
•
Operate the remote control unit at a distance of not
more than 5 meters from the Infrared sensor.
Language can not be
changed
•
There is only one language on the on the disc
recorded.
•
Choose in the Title menu of the Video DVD the
language which do you want.
Angle can not be
changed
•
The angles may be recorded for only specific scences
and are not normally everytime available.
No key operation
•
Turn the unit off and then back to on after a couple of
minutes.
Y Pb Pr activation
•
Please connect the video cable properly.
•
Please pay attention to the colour coding of the cable.
•
Select in the setup settings the option YUV.
•
Change the source input on the TV set
CVBS, S-Video and
SCART with distorted,
devided or no picture
picture You had press the Video button during you uses the YUV,
CVBS, SCART or S-Video output. Press the Video button
again, until the correct system appears on the screen.
Forget the password The master password is 8888. Please insert the password by
the Preference setup settings and the option Password
Downloaded From Disc-Player.com Xoro Manuals