Xoro HSD 8450, Operation Manual

Page: 75 / 262

HSD 8450
23
Engl
ish
PLAYBACK
Search or GoTo
The on-screen menu enables comfortable access to any sections of a medium. To do this,
proceed as follows:
1.
Select the desired category by repeatedly pressing the button TIME button.
2. Now move to the point from which the replay should start. Depending on the type of
medium this may be a track number, a chapter or even a point in time. The input
must be made with the Numerical Buttons. Playback begins after a short time.
You have the option to select a preferred subtitle from those included on the DVD video disc
by pressing the
SUBTITLE button.
•
Press the SUBTITLE button during playback.
•
Press the SUBTITLE button during playback until the subtitles disappears.
With the VIDEO button you can change the video output without using the setup settings.
The sequence is:
RGB (for SCART), YUV (for 3-wire component connection) and Off (for CVBS and S-Video.
If you want to playback pictures, music or video from USB storage or from Card Media,
please insert the USB flash storage into the USB jack or a SD/MMC/MS card into the card
reader on the front side of the player. Press the USB/CARD button and the DVD Player
changes the source from:
DVD —> USB —> CARD
If there is no disc in the loader and you connect a storage (USB or Media Card) to the plug,
than the storage will be recognizes automatically. If not, please press the USB/CARD button.
The player shows after in the file browser the supported content on the screen.
Security Notes:
If you want disconnect the USB flash media, press at first the USB/CARD button and
change to “DVD”. When the DVD loader is active than you can disconnect the USB flash
media or Memory Cards.
Due to the legal requirements of CE-conformity, the customer is asked to only connect USB-
Sticks to the USB port.
Selecting Subtitles
Change Video putput
USB/CARD
Downloaded From Disc-Player.com Xoro Manuals