XONTEL XT-800FXO User Manual Download Page 64

Page: 64 / 65

Reports

Users could check the call logs, system logs on

Status→Reports

page, and use the

packet Tool and Port Monitor Tool to capture debug logs from XT-800FXO Gateway.

Call Logs
System Logs
Packet Tool

Port Monitor Tool

Call Logs

The call log captures all call details, including call time, caller number, callee number,

call type, call duration, etc. An administrator can search and filter call data by call date,

caller/callee, trunk, duration, billing duration, status, or communication type.

Figure 13-1 Call Logs

System Logs

You can download and delete the system logs of XT-800FXO Gateway.



Enable Hardware Log

Save the information of hardware; (up to 4 log files)



Enable Normal Log

Save the prompt information; (up to 16 log files)



Enable Web Log

Save the history of web operations (up to 2 log files)



Enable Debug Log

Save debug information (up to 2 log files)

Summary of Contents for XT-800FXO


































































Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands

XONTEL XT-800FXO, User Manual

Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands