XONTEL XT-800FXO User Manual Download Page 42

Page: 42 / 65

Host Name

Note

: DDNS allows you to access your network using domain names instead of IP

address. The service manages changing IP address and updates your domain

information dynamically. You must sign up for service through dyndns.org,

freedns.afraid.org, www.no-ip.com, www.zoneedit.com.

Static Route

XT-800FXO Gateway will have more than one Internet connection in some situations

but it has only one default gateway. You will need to set some Static Route for XT-

800FXO Gateway to force it to go out through different gateway when accessing to

different internet.

The default gateway priority of XT-800FXO Gateway from high to low is VPN/VLAN



LAN port.

Figure 9-10 Static Route

1) Route Table

The current route rules of XT-800FXO Gateway.

2) Static Route Rules

You can add new static route rules here.

Table 9-4 Description of Static Route Settings

Items

Description

Destination

The destination network to be accessed to by XT-800FXO Gateway.

Subnet Mask

Specify the destination network portion.

Gateway

Define which gateway XT-800FXO Gateway will go through when

accessing the destination network.

Metric

The cost of a route is calculated by using what are called routing

The host name you have got from the DDNS server

Summary of Contents for XT-800FXO


































































Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands

XONTEL XT-800FXO, User Manual

Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands