XONTEL XT-800FXO User Manual Download Page 57

Page: 57 / 65

Firmware Update

XT-800FXO Gateway can be upgraded to a new firmware version via network or

locally. Users could upgrade firmware via HTTP or TFTP. Please go to

System→

System Preferences→ Firmware Update

to do upgrade.

Notes:

1. If

“Reset configuration to Factory Defaults” is enabled, the system will be restored

to factory default settings.

When updating the firmware, please don’t turn off the power. Or the system will
be damaged.

3. If you are trying to upgrade through HTTP, please make sure that your XT-

800FXO Gateway is able to visit external network, or it cannot access XonTel

website to get the firmware file, causing the upgrade fail.

Upgrade through HTTP

On the Firmware Upgrade page, choose

HTTP URL

Step1.

Enter the download link of the firmware file.

Note:

the HTTP URL should be a

BIN

file download link.

Step2.

Click “Start” to upgrade.

Figure 11-7 Upgrade through HTTP

Summary of Contents for XT-800FXO


































































Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands

XONTEL XT-800FXO, User Manual

Search results

Summary of Contents for XT-800FXO

Reviews:

Related manuals for XT-800FXO

Brands by name

Popular brands