Automatic answer after charging
After the user enters the standby interface, manually operate key: menu - > function set, At this time, the
terminal switches to the function setting interface and scrolls the screen through the use of the downward
navigation key to the automatic charging reception setting as shown in the following figure:
Figure 111 : Automatic Answering Setting
⚫
Command function: Automatic answer setting
⚫
Required parameters:
Automatic Answer
Input mode:
select the corresponding left soft key (default: auto enabled).
Parameter description:
Start the end of charging automatic answer function
Note:
After the user settings are completed, you must manually press the "OK" key to submit to save,
otherwise it will not take effect.
WLAN
Search and connect
After the user enters the standby interface, manually operate key: menu - > WLAN set, the terminal will switch
to WLAN interface. As shown in the following figure:
