www.xmarto.com
24
Detailed Instructions:
http://www.xmarto.com/helpcenter/?/article/9
1)
Connect the camera to your NVR’s Ethernet port with a network cable. Plug the camera to power.
The Ethernet port on the camera cable end will light up.
2)
Right click your NVR mouse to pop out NVR main menu, then click Device Manage. Click
“Refresh” on upper right and wait for a moment, you’ll see the camera displays in upper box
，
with IP address 192.168.1.168. (192.168.1.xxx is camera’s wired IP address, so when you connect
the camera to NVR using network cable, you see the camera show in upper box with this wired IP
address.)
