www.xmarto.com
9
Rear View
(Images used are for reference only. Your product may vary slightly.)
1.
VGA Video Output -
Connect the VGA cable from the VGA output port on the NVR to the VGA
input port on your TV/Monitor. (VGA cable not included)
2.
HDMI Video Output -
Connect the HDMI cable from the HDMI output port on the NVR to the
HDMI input port on your TV/Monitor. (HDMI cable not included)
3.
RJ-45 (Ethernet) Port -
The RJ-45 port will be used to connect the Wireless NVR to your
modem/router for remote viewing. Please note that your Wireless NVR comes with built-in Wi-Fi for
the cameras to transmit to the NVR. However, you will need to manually connect the NVR to your
modem/router to remotely view on a smart device or PC/Mac®. (If you need to add camera to the
system, or repair camera to NVR, you can also use this Ethernet port to pair camera to NVR.)
4.
USB Ports -
USB ports allow for the connection of a USB mouse and/or a USB flash drive. You
will connect the included USB mouse to assist you in navigating the NVR’s menu interface. You will
connect a USB flash drive to download video files from the NVR for long term storage or sharing.
5.
Power Input -
Power input is used to connect the included 12V DC power supply.
6.
NVR Antenna Mount -
For installation of two included NVR antennas.
NOTE
: The maximum number of cameras you can connect to your wireless NVR will be
determined by the number of channels.
