INDEX
USER MANUAL - OPTIMA RT10 6K/10K
www.xmart-ups.com
VER.161205-GA2 (ENG)
4
1.
GENERAL SAFETY INSTRUCTIONS
WARNING
: It is required to read and understand this manual. Follow all instructions given in this manual for starting up and operating this
product. Only qualified technician must start-up, operate and maintain this product. Keep manuals as a guide for future consults.
UPS manufacturer or distributor will never be responsible for any accident produced by lack of knowledge or negligent practices at the
moment of install, starting up or maintain this product. UPS manufacturer or distributor is not liable for any damage that might rise from
misusing this unit or defective installation.
SAFETY:
ELECTRIC SHOCK RISK
This product operates with dangerous voltages. It must be installed, operated and maintained ONLY by qualified technicians trained for
this kind of products. Service personnel MUST know and understand very well all electric risks related to this product.
If you are not qualified technician do not try to install, operate or repair this product.
CAUTION:
There are dangerous voltages in the UPS power outlets although the equipment is not plugged to power line.
CAUTION:
Inside this equipment, due to internal batteries, there are ALWAYS dangerous voltages, EVEN the UPS is OFF and unplugged.
CAUTION:
There are dangerous voltages in internal DC Capacitors. Wait at least 10 minutes after turning off UPS before opening it to
access inside.
CAUTION:
Power off UPS and unplugged it from AC Line before opening it to access inside this unit.
CAUTION:
Before starting the opening procedure, remove all jewelry and metallic objects such as: Rings, Watches, Bracelets, etc., because
they could contact conductive parts and components inside the UPS and this might cause discharges and/or short circuits. Make sure
using tools properly isolated to avoid electrical risks.
WARNING:
This product has been designed to be used indoors protected from water, direct sun light, dust and extreme temperature.
WARNING:
Do not put any object on the UPS; do not apply any force over UPS. Do not cover UPS ventilation.
WARNING:
This UPS must be connected to appropriate electrical service according to selected model. Technical specs label in the UPS
shows the UPS power ratings. DO NOT connect this UPS to any of its own power outlets, this could damage the unit permanently.
WARNING:
Do not connect AC motor based equipment without a careful sizing of the UPS based on inrush current instead of average
current. Inrush current typical of motor based system could overload this UPS.
WARNING:
In case of emergency, power-off UPS and turn it off by <OFF> button in front panel. Then call technical service.
