11
To remove, carefully lift the adhesive pad with your fingers or a spoon . Warming the pad with a
hair dryer for several minutes will help soften the adhesive .
You can reinstall the swivel mount using the extra adhesive pad .
Installing the Vent Mount
Locate a vent with horizontal slats
1
sturdy enough to hold your XM cradle and radio .
Adjust the clamps to fit your vent .
2
Snap the mount onto the vent .
3
To remove, push the mount into the vent, then lift up .
Summary of Contents for XMP3
