XM XMP3, Installation Manual

Page: 10 / 34

10
Step 3: Install the Swivel or Vent Mount
You can use either the included swivel mount or vent mount for your XMp3 radio depending
on your vehicle interior .
Installing the Swivel Mount
CAUTION!
The adhesive used with the swivel mount may make it difficult to remove .
Do not install this mount on leather surfaces and make sure the air temperature is at least
60°F (15°C) during installation .
Locate a flat surface for the mount . Make sure there is ample room for the XM 1
cradle and radio when installed .
Clean the surface with the preparation kit and let it dry thoroughly . 2
Peel off the adhesive liner . Position, press, and hold the swivel mount in place 3
for 30 seconds .
IMPORTANT!
Let the adhesive cure for 24 hours before attaching the XM cradle and
radio to the mount .
Turn the swivel to accommodate the XM cradle and radio . Adjust the tension
4
via the center screw .
You can adjust this screw
to adjust the tension of the
mount with a screwdriver .
Vehicle Installation