XM XMP3, Installation Manual

Page: 12 / 34

12
Step 4: Connect your XMp3 Radio
Plug the antenna jack into 1
antenna
on the cradle .
Plug the power adapter jack into 2
5V DC
on the cradle .
NOTE! Some car CLAs remain powered even when the car is turned off . To avoid battery
drain, it is recommended to unplug the power adapter or remove the XMp3 from the
dock if leaving the car unattended for an extended period .
Plug the audio adapter jack into
3
line out on the cradle .
• Use the
audio cable
(included) if your vehicle has an audio input jack .
• Use the cassette adapter (sold separately) if your vehicle has a built in
cassette player .
4 Insert mount into the cradle then slide it up until it feels tightly in place .
5 Insert your XMp3 radio into the cradle .
NOTE!
If your car does not contain a cassette player or an audio input, you will need to
use either the XM SureConnect (sold separately) or the FM Direct (sold separately) .
line out
5V DC
antenna
Vehicle Installation