manualshive.com logo in svg

Xlink ITC-BT, Owner'S Manual

Share
Download
Xlink ITC-BT Owner'S Manual Download Page 8

8

Should.you.not.want.live.calls.to.be.transferred.automatically.or.may.want.to.force.the.cell.
phone.to.disconnect.from.the.XLink.
When.a.line.is.connected.(blue.light.remains.on).pressing.the.line.button.will.disconnect.
that.line.and.the.light.will.turn.off.once.disconnected..Audio.will.be.transferred.to.the.cell.
phone.and.you.can.continue.your.call.on.the.cell.phone.
When.a.line.is.not.connected.and.not.searching.(blue.light.remains.off).pressing.the.line.
button.will.put.the.line.into.searching.mode.(blue.light.flashes.slowly)..If.the.cell.phone.
is.within.range.the.cell.phone.will.connect.with.the.XLink.and.the.blue.light.will.remain.
solid.

HINT:
•..Some.cell.phones.will.prompt.you.when.you.come.within.range.of.the.XLink..You.can.

then.decide.if.you.want.to.transfer.the.call.to.the.XLink.

After.connecting.one.or.more.telephones.to.the.XLink,.the.setup.test.feature.can.be.
used.to.ensure.proper.connections.
..Ensure.the.green.light.is.on.and.the.red.light.is.not.flashing.
..Simultaneously.press.and.hold.the.line..and.line..buttons.for.approximately.two.

seconds.

3..All.telephones.connected.to.the.XLink.should.start.ringing.

manual BlueTooTh ConneCTIon

TesTIng The seTuP

Summary of Contents for ITC-BT

























Reviews:

No comments

Brands by name

Popular brands

Load more brands