background image

This.unit.has.been.tested.and.found.to.comply.with.the.limits.for.a.Class.B.digital.
device.as.specified.in.Part.5.of.the.FCC.rules..These.limits.provide.reasonable.
protection.against.radio.and.TV.interference.in.a.residential.area..However,.your.
equipment.might.cause.TV.or.radio.interference.even.when.operating.properly..To.
eliminate.interference,.try.one.or.more.of.the.following.corrective.measures:

•. Reorient.or.relocate.the.radio.or.TV
•. Increase.the.distance.between.the.equipment.and.the.radio.or.TV
•. Use.outlets.on.different.electrical.circuits.for.the.equipment.and..

the.radio.or.TV

Changes.or.modifications.not.expressly.approved.by.the.party.responsible.for.
compliance.could.void.the.user’s.authority.to.operate.the.equipment.

FCC noTICeS

Calling 911 using a cell phone works differently then calling 911 on a land line. 
In order for a call to 911 emergency services to be able to provide your exact 
location, E911 services must be deployed in your area and you must have a 
GPs enabled and activated call phone. see your cell phone owner’s manual to 
determine if your cell phone has that feature and make sure that the feature is 
activated.

CallInG 911

Summary of Contents for ITC-BT

























Reviews: