43
DarkStar User Guide
3: Software
www.xkl.com
Client interface 5 shows a loss of signal (LOS) on the line, and no receiver input power. Environmental conditions are steady,
but an error on the line has caused an automatic shutdown of the transmitting laser. The report also shows sensor readings
and the thresholds used for event and SNMP reporting.
Labcons2_DSM#
show int client 5 verbose
Detailed Information for Interface Client 5
Description: .......................
Vendor: ............................ FINISAR CORP.
Part Number: ....................... FTLX1471D3BCV
Manufacturing Date: ................ 101219
Serial Number: ..................... UJR0JKW
Module Type: ....................... SFP
Signal Type: ....................... 10GE
Supported Distance: ................ 10 Km on SM
Reported Wavelength: ............... 1310nm
I2C Address: ....................... 0,5,80
General Status:
Administrative State: ............ Up
Transmitter: ..................... Disabled
Receiver: ........................ LOS
Error Forwarding: ................ Laser Shutdown by Virtualight
Total Down/Error Time: ........... 153828s
Time Since Last State Change: .... 1:18:43:48
Last Cleared Time Stamp: ......... Jul 12 01:57:55 UTC
I2C Transaction Error Count: ..... 0
Status Register Contents: ........ 0x4A00
Sensor Status:
Laser Temperature: ............... OK
+3.3V Supply Voltage: ............ OK
Rx Laser Input Power: ............ Low Alarm
Tx Laser Output Power: ........... Disabled
Tx Laser Bias Current: ........... Disabled
Sensor Readings and Thresholds:
Laser Temperature: ............... 31C
High Alarm: .................... 78C
High Warning: .................. 73C
Low Warning: ................... -8C
Low Alarm: ..................... -13C
+3.3V Supply Voltage: ............ 3.30V
High Alarm: .................... 3.70V
High Warning: .................. 3.60V
Low Warning: ................... 3.00V
Low Alarm: ..................... 2.90V
Rx Laser Input Power: ............ <-40.0dBm
High Alarm: .................... 2.4dBm
High Warning: .................. 1.9dBm
Low Warning: ................... -18.0dBm
Low Alarm: ..................... -20.0dBm
