XIONEER Vortex EZ, User Manual

Page: 9 / 41

Page 9
•
There is a danger of crushing and cutting on the
propeller. Do not touch the rotating propeller.
•
Only service or remove the propeller when the unit
is switched off, unplugged, cooled down, and
completely empty.
• Please mind the minimum fill level (MIN). Do not
use
Vortex EZ when fill level is lower than “MIN”
marking. Do not power on the Vortex EZ when
tank is empty.
• Keep the dyes away from excessive heat or open
fire. Remove all sources of ignition when handling
the dyes.
•
Improper usage may impair the protection
supported by Xioneer .
•
Always check Vortex EZ is safe to use after
conducting maintenance.
Preparation
Carefully unpack the Vortex EZ . Please check that all
parts are in the package according to the scope of
delivery. If there is damage to individual components or
parts are missing, do not commission the Vortex EZ and
contact your vendor. Before initial start-up, the Vortex EZ
must be acclimated to the ambient conditions. To do this,
leave it in the intended environment for at least 1 hour.