XIONEER Vortex EZ, User Manual

Page: 4 / 41

Page 4
Introduction
Thank you for choosing a Xioneer product.
Please read these operating instructions carefully. They
provide you with the necessary information for operating
your
Vortex EZ dyeing station and avoiding possible
dangers.
Note - This icon shows you important tips.
Attention - This symbol draws your attention to
special dangers and protective measures.
Caution – Hot surface or hot steam! Risk of burns
or risk of scalding.
Product description
The Xioneer Vortex EZ is designed to automatically dye
3D printed materials used in FFF/FDM, SLA, SLS, MJF and
SAF 3D printing. It is intended for personal and
professional use if safety precautions are met.
The device dyes materials using water, which is heated
and stirred. To enable the dyeing, additives such as dye,
acid or detergent can be added to the water.