6. Drilling holes (rotation only)
+ +
Bolt Drill chuck Drill chuck shank(SDS-plus shank)
Drill chuck key
{
Drill chuck ass’y (includes Drill chuck key) and
chuck (for drilling in steel or wood).
7. Hammer grease
（
30g
）
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
{
Drilling anchor holes
{
Drilling holes in concrete
{
Drilling holes in tile
Rotation only function
{
Drilling in steel or wood
(with optional accessories)
Hammering only function
{
Light-duty chiseling of concrete, groove digging and edging.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a power receptacle while
the power switch is in the ON position, the power tool will start operating immediately, which could
cause a serious accident.
3. Extension cord
When the work area is removed from the power source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be kept as short as practicable.
4. Mounting the drill bit (SDS-plus)
CAUTION:
To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle.
NOTE:
When using tools such as bull points, drill bits, etc., make sure to use the genuine parts designates by
our company.
