background image

• Drilling anchor holes
• Drilling holes in concrete, tile, brick, and similar materials
• Drilling holes in steel and wood
• Tightening and loosening machine screws and wood screws

PRODUCT NAME

Hitachi 14.4 V Cordless Rotary Hammer

Model  

DH 14DL, DH 14DMR

Hitachi 18V Cordless Rotary Hammer

Model  

DH 18DL, DH 18DM

R

[ NEW FEATURES ]

   Fastest drilling speed

   Compact & lightweight

      Switchable hammering force mechanism

     

Soft grip handle

 

    Li-ion battery for DH 14DL/DH 18DL,

      Ni-Cd battery for DH 14DMR/DH 18DMR

      Replaceable carbon brush for longer motor life

      Idle striking prevention mechanism

   With light hook

The Models DH 14DL and DH 18DL are cordless rotary hammers equipped with a 14.4-V lithium-ion battery and
a 18-V lithium-ion battery respectively.
The Models DH 14DMR and DH 18DMR are cordless rotary hammers equipped with a 14.4-V Ni-Cd battery and
a 18-V Ni-Cd battery respectively.
(1) Fastest drilling speed
(2) Compact and lightweight
(3) Switchable hammering force mechanism
(4) Soft grip handle
We aim to expand our market share with the new Models DH 14DL/DH 14DMR/DH 18DL/DH 18DMR.

LIST Nos.
DH 14DL: G876,
DH 14DMR: G877,
DH 18DL: G878,
DH 18DMR: G879
Jul. 2007

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

International Sales Division

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

D

Summary of Contents for DH 14DL



















































Reviews: