conditions and the work to be performed. Use of the power tool for operations different from
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
Special requirements for rotary hammer
1.
Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
2.
Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
3.
Hold Power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
4.
Wear a dust mask.
Do not inhale the harmful dusts generated in drilling or chiseling operation. The
dust can endanger the health of yourself and bystanders.
5.
Always hold the body handle and side handle of the power tool firmly.
Otherwise the counterforce
produced may result in inaccurate and even dangerous operation.
6.
Before beginning work, check the working area (e.g. with a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present.
Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
7.
In case of damages the replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organization
8.
Do not touch the bit during or immediately after operation. The bit becomes very hot during operation
and could cause serious burns.
9.
Do not use the power tool with a damaged cord. Do not touch the damaged cord and pill the plug
from the outlet when the cord is damaged while working.
Damaged cords increase the risk of an
electric shock.
Warning:
Reduce the working time to avoid risks related with too much vibration.
In this operator's manual/or machine’s labels following symbols are used:
Accordance with essential applicable safety of European directives
Double insulation
Denote risk of personal injury, loss of life
or damage to the tool
in case of nonobservance of
the instruction in this manual.
2. Safety instructions
