Changing the Chiselling Position (Vario-lock)
The chisel can be locked in 12 positions. In this manner, the optimum working position can be set for each
application.
Insert the chisel into the tool holder.
Push the Move limited sleeve 3 forward and turn the chisel to the required position with the Move limited
sleeve 3.
Release the Move limited sleeve 3 and turn the chisel until it latches.
Maintenance and Service
Maintenance and cleaning
Before any work on the power tool itself, pull the mains plug.
For safe and proper working, always keep the power tool and the ventilation slots clean.
A damaged dust protection cap should be changed immediately.
We recommend having this carried
out by an after-sales service.
Indicator 6
When the carbon brushes are worn out, the power tool switches itself off. This is indicated approx.
8
hours
beforehand by the lighting or blinking of the indicator
6
. The power tool must then be sent to an after-sales
service agent. Addresses are listed in the Section “Service and Customer Assistance”.
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair should
be carried out by an after-sales service center for XINPU power tools.
In all correspondence and spare parts orders, please always include the 8-digit article number given on the
type plate of the power tool.
