Xinje XP3-16R, Manual

Page: 37 / 43

XP3 PLC/HMI Hardware Manual Page 37 of 42 LMAN007_R2V2
2.
Set the left elements:

Add seven in the screen.

Set the font and content, the content is “Status Indication”.

Set the left six texts’ property: The content is: “Power”, “Run”, “Light”, “Auto Wind”, “Up”,
“Down”.

Modify the font and choose “Underline”. Place in the proper position.

Then add six indicator lamps , place by the right of the corresponding text. Set the
property separately:
Power: coil
M0
Run: coil
M1
Light: coil
M10
Auto Wind: coil
M11
Up: coil
M12
Down: coil
M13

Add an icon, set its property: Register ID is D10; add the display content shown below:
Then place it by the right of ‘Status Indication’:

Next, add two text units, one register, set the property as following:
 Text 1 content is “Temp.”
 Text 2 is “ºC”, they both choose inverse.
 Register ID is D 100, the display bits is 4, the decimal bit is 1, also choose inverse, the
left are defaulted.
 Place them in the proper position, used as temperature indication.

Place keys in the screen. Modify the first content as “Stop”, set the font and size; Set the
touch key’s function parameters: Screen Jump, Jump to screen 1, then place in the right
bottom. Modify the second content as “Back”. Set the font and size. Set the touch key’s
function parameters: Set the coil; Coil number: M51; Operating item: Momentary ON.